Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II)
| Brand | Kirloskar |
| Power | 0.5 hp |
| Weight (Approx.) | 5 kg |
| Flow Rate | 33 lpm |
| Head | 21 meter |
| Model No | ANISA - II |
| Product Type | Self Priming Monoblock Pump |
| Wattage | 0.37 kW |
| Electricity Connection | Single Phase |
| Rated Voltage | 240 Volt |
| Insulation Class | B |
| Pipe Size (Suction X Delivery) | 25x25 mm |
| Head Range | 6 to 21 Meter (19 to 68 Feet) |
| Discharge Range | 2000 to 500 LPH (33 to 8 LPM) |
| Impeller | Brass |
| Motor Body | Aluminium |
| Delivery Casing | Cast Iron |
| Shaft | Carbon Steel |
| Mechanical Seal | Carbon Vs Ceramic |
About Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II)
Innovative design manufactured at state of art plant, delivers optimum efficiency at lower energy consumption resulting in significant cost savings. CED is the latest coating technology for corrosion resistance with uniform coating, provides 5 times more protection over conventional painting, resulting in longer life. Hydraulic parts of Kirloskar pumps are CED coated. The motor is designed to withstand wide voltage variation from 160 to 260 volts and reduces chances of motor burning due to low/high voltage. The pumps are fitted with shielded ball bearings, which results in low noise level and so no external lubrication is required throughout the life cycle. Minimum vibrations protect components from damages during the operations, consistent performance as concentricity is maintained. Easy maintainable design and better interchangeability of components so that pump can be serviced even at remote locations by semi-skilled technicians. The pump has suction lift capacity up to 7.5 meters with high head, allowing to pump water at high volumes for a variety of applications. All electrical ports of the pump are covered, which makes it safer to use. It allows user to carry the pump anywhere with ease, adding to its portability and convenience of use.
Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) specifications
| Power | 0.5 hp |
|---|---|
| Weight (Approx.) | 5 kg |
| Flow Rate | 33 lpm |
| Head | 21 meter |
| Model No | ANISA - II |
| Product Type | Self Priming Monoblock Pump |
| Wattage | 0.37 kW |
| Electricity Connection | Single Phase |
| Rated Voltage | 240 Volt |
| Insulation Class | B |
| Pipe Size (Suction X Delivery) | 25x25 mm |
| Head Range | 6 to 21 Meter (19 to 68 Feet) |
FAQs related to Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II)
Does ToolHaat offer installation guidance for Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II)?
+
Installation requirements vary by Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) model — check the product listing for included documentation. For larger installations, our sales team can help connect you with the vendor for on-site guidance where available.
What capacity or specification of Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) should I choose?
+
The right Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) depends on your required flow rate, head (lift height), and power source — each listing specifies these details. For help matching a pump to your specific application, contact ToolHaat support or submit an RFQ with your requirements.
Can I get bulk pricing for Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) if I need multiple units?
+
Yes — Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) uses tiered bulk pricing on ToolHaat, with unit cost decreasing at higher order quantities. For distributor or contractor-level volumes, use the RFQ feature for a dedicated quote.
Is a GST invoice provided for Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) purchases?
+
Yes, every Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) order generates a GST invoice automatically, suitable for input tax credit claims and standard business procurement records.
Does Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) come with a manufacturer warranty?
+
Warranty coverage for Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II) varies by brand and is listed on the product page. ToolHaat support can help connect you with the vendor for warranty claims or servicing after your purchase.
Related Products
View All →
You are viewing: Water Pumps and Motors › Kirloskar 0.5 HP Single Phase Self Priming Monoblock Pump, 21 m Max. Head, 2000 LPH, 25 x 25 mm (ANISA-II)